Sintered plate dust collector has wide application prospects in the field of waste gas treatment

The sintered plate in the sintered plate dust collector has multiple application advantages, which are mainly reflected in the following aspects:

Efficient dust removal capacity: The sintered plate adopts a unique wave design, which effectively increases the filtration area and reduces the floor space. Its micron-level filter pore size can effectively remove smoke and dust above 1um, and can also remove most of the smoke and dust above 0.1um, making the dust removal efficiency reach more than 99.9%, and even the collection efficiency of ultra-fine dust above 0.1μm can reach 99.999%.

Strong self-cleaning ability: The sintered plate has a rigid structure, which allows the backflush gas to act more directly on the powder attached to the filter surface without buffering, so the dust cleaning effect is good. As the dust trapped on the surface coating of the sintered plate increases, the dust cleaning control system with timing or fixed differential pressure will automatically open the quick-opening pulse valve to effectively remove the dust on the surface of the sintered plate through compressed air, ensuring the continuous and efficient operation of the dust collector.

Excellent chemical resistance: The sintered plate base is sintered from a variety of polymer materials with different densities. The PTFE coating penetrates deep into the pores of the sintered plate base and forms an ultra-fine microporous anti-stick structure with hydrophobic and oleophobic properties. In addition, the special resin material can withstand long-term high-temperature corrosion from strong acids and alkalis, allowing the sintered plate to maintain stable performance in harsh environments.

Ultra-long service life: The sintered plate has high strength and toughness and can withstand repeated impacts of high-pressure gas thousands of times a day. Its wear resistance is more than 4 times that of steel. Combined with its acid and alkali resistance and perfect self-cleaning effect, the service life of the sintered board can reach more than 10 years.

Stable pressure loss: The advanced manufacturing technology of PTFE microporous membrane enables surface filtration in the dust removal process. During operation, the equipment resistance does not change with the change of the dust cleaning process and the degree of dust adhesion. The resistance is constant, ensuring the collection efficiency of the air suction port and reducing the operating cost of the facility.

To sum up, the sintered plate in the sintered plate dust collector has broad application prospects in the field of industrial waste gas treatment due to its efficient dust removal ability, strong self-cleaning ability, excellent chemical resistance, ultra-long service life and stable pressure loss.