Views: 1 Author: Site Editor Publish Time: 2023-08-10 Origin: Site
The bag dust collector used in Jiangping Thermal Power Plant is a flue gas purification equipment with high efficiency, low energy consumption and easy operation. It plays an important role in waste gas treatment in thermal power plants and other industrial fields, protecting the environment and human health. With the continuous advancement of technology, the performance and efficiency of bag dust collectors will be further improved.
In the Xinjiang Energy (Group) 2×350MW cogeneration project, the customer chose the pulse bag dust collector unit/dust collector and its supporting equipment produced by Jiangping.
Device configuration:
Pulse bag, vertical type, with ash hopper and air compressor; with centrifugal fan, the fan is arranged on the side, and the fan blows out at 0º or 180º.
Partial selection of dust removal unit/dust collector parameters
serial number | Project name | unit | Remark |
1 | Dust removal unit/dust collector type | - | Vertical, with ash hopper |
2 | Dust removal unit/dust collector air volume | m3/h | ~6000 |
3 | Total power of dust removal unit/dust collector | kW | ≤7~8 |
4 | Dust removal unit/dust collector power supply | - | AC380V,50Hz |
5 | Full dust removal efficiency | % | ≥99.9 |
6 | Filter bag filtration wind speed | m/min | ≤2.0 |
7 | Filter bag material | - | PTFE peritoneal needle felt filter material |
8 | body resistance | Pa | ≤1200 |
9 | Fan form | - | Centrifugal, explosion-proof type |
10 | Fan air volume | m3/h | 5000~5500 |
11 | Fan full pressure | Pa | 1500~1700 |
12 | Overall dimensions of dust removal unit/dust collector (excluding fan and maintenance platform) | mm | Length×width×height≤2500×2500×5500 |
13 | Pulse valve method | — | Submerged |
14 | Compressed air requirements for dust cleaning | MPa | 0.4~0.6 |
15 | Shell design pressure | kPa | -6~+6 |
16 | Housing material |